CB Radio Times in Australia
Official support for CB40/A/C/SP => CB40A v1 & CB40A v2 => Topic started by: BuNtEr on October 10, 2018, 03:59:19 PM
-
Official support for CB40A
if the FAQ dont have the answers post in here and see if we can help you.
-
New firmware update
20/10/2018 -1:31 Bugfix: When changing scan level font would switch to small screen mode. Fixed.
20/10/2018 - 2:45 Bugfix: Removed default channel status from all menu settings except default channel.
-
22/10/2018 Mod 2 - additional support for 10 bit uPD858 PLL. Found that you need 9 wires to the 858 PLL, with the 8 wires you lose channels 1 to 7, so added a 9th wire and firmware update coding for the extra wire.
-
23/10/2018 11:09am added default large screen and ROM enabled or disabled according to the PLL presets. You will still have to select a default channel and if manually programming it you will have to manually set Binary/BCD, NCode (PLL Offeset), large or small screen and default channel but the presets should do all that except default channel.