Official support for CB40/A/C/SP > CB40

Official support for CB40

(1/1)

BuNtEr:
Official support for CB40

if the FAQ dont have the answers post in here and see if we can help you.

BuNtEr:
a new firmware update has been made

Fixed
Bug for the home channel not saving when chosen.

Updated
6 digit frequency readout from 5 digit

BuNtEr:
New firmware update

20/10/2018 -1:31 Bugfix: When changing scan level font would switch to small screen mode. Fixed.

20/10/2018 - 2:45 Bugfix: Removed default channel status from all menu settings except default channel.

BuNtEr:
22/10/2018  Mod 2 - additional support for 10 bit uPD858 PLL. Found that you need 9 wires to the 858 PLL, with the 8 wires you lose channels 1 to 7, so added a 9th wire and firmware update coding for the extra wire.

BuNtEr:
23/10/2018 11:09am added default large screen and ROM enabled or disabled according to the PLL presets. You will still have to select a default channel and if manually programming it you will have to manually set Binary/BCD, NCode (PLL Offeset), large or small screen and default channel but the presets should do all that except default channel.

Navigation

[0] Message Index