Author Topic: Official support for CB40  (Read 838 times)

0 Members and 1 Guest are viewing this topic.

Offline BuNtEr

  • Administrator
  • Jr. Member
  • *****
  • Join Date: Apr 2018
  • Posts: 65
  • Karma: +0/-0
    • View Profile
Official support for CB40
« on: October 10, 2018, 03:58:15 PM »
Official support for CB40

if the FAQ dont have the answers post in here and see if we can help you.

Offline BuNtEr

  • Administrator
  • Jr. Member
  • *****
  • Join Date: Apr 2018
  • Posts: 65
  • Karma: +0/-0
    • View Profile
Re: Official support for CB40
« Reply #1 on: October 13, 2018, 10:43:39 PM »
a new firmware update has been made

Fixed
Bug for the home channel not saving when chosen.

Updated
6 digit frequency readout from 5 digit

Offline BuNtEr

  • Administrator
  • Jr. Member
  • *****
  • Join Date: Apr 2018
  • Posts: 65
  • Karma: +0/-0
    • View Profile
Re: Official support for CB40
« Reply #2 on: October 20, 2018, 10:24:53 AM »
New firmware update

20/10/2018 -1:31 Bugfix: When changing scan level font would switch to small screen mode. Fixed.

20/10/2018 - 2:45 Bugfix: Removed default channel status from all menu settings except default channel.

Offline BuNtEr

  • Administrator
  • Jr. Member
  • *****
  • Join Date: Apr 2018
  • Posts: 65
  • Karma: +0/-0
    • View Profile
Re: Official support for CB40
« Reply #3 on: October 22, 2018, 03:43:02 PM »
22/10/2018  Mod 2 - additional support for 10 bit uPD858 PLL. Found that you need 9 wires to the 858 PLL, with the 8 wires you lose channels 1 to 7, so added a 9th wire and firmware update coding for the extra wire.

Offline BuNtEr

  • Administrator
  • Jr. Member
  • *****
  • Join Date: Apr 2018
  • Posts: 65
  • Karma: +0/-0
    • View Profile
Re: Official support for CB40
« Reply #4 on: October 23, 2018, 11:10:16 AM »
23/10/2018 11:09am added default large screen and ROM enabled or disabled according to the PLL presets. You will still have to select a default channel and if manually programming it you will have to manually set Binary/BCD, NCode (PLL Offeset), large or small screen and default channel but the presets should do all that except default channel.
« Last Edit: October 23, 2018, 11:16:17 AM by BuNtEr »