Author Topic: CB40A Sale $35 plus shipping/postage  (Read 2865 times)

0 Members and 1 Guest are viewing this topic.

Offline BuNtEr

  • Administrator
  • Jr. Member
  • *****
  • Join Date: Apr 2018
  • Posts: 70
  • Karma: +0/-0
    • View Profile
CB40A Sale $35 plus shipping/postage
« on: October 22, 2018, 07:42:53 PM »
CB40A kit Sale info

$35 plus shipping/postage

Contact Peter on this Email: cb40switch@tpg.com.au
tell peter your postcode and all needed info so he can give you a price on postage.

https://www.youtube.com/watch?v=k8M97A7fjZc&t=46s

Installed into a HMV Roadhound TX77 SSB 18ch radio.
https://www.youtube.com/watch?v=do7b523YEiY

http://www.cbrtia.com/cb40.a.c/cb40A/videos/10000000_1859945397460723_1723342403315695616_n.mp4

The Kit

Hardware
  • CB40 in a custom 3D printed case with holes on all sides so you can use cable ties to install it.
  • Encoder on a custom board
  • OLED screen (0.96" 128X64 White OLED I2C IIC Serial LCD LED SSD Display SSD1306)
  • CB40A 3D (3 piece.  Inner and front and rear shell), Printed housing with the encoder and OLED screen fitted
Cables
  • Encoder Cable
  • OLED Cable
  • Power Cable
  • PLL cables
  • Scan Cable

No Warranty Given
  • On the OLED screen if you brake it or burn it out from getting the wires wrong way around.
  • On the CB40 if you damage it or burn it out due to wiring it wrong. or you in anyway try to modify the CB40 in any way thats not been instructed by the designer.
  • if you cut or drill or modify the housing in anyway this isnt covered by Warranty

CB40 will be tested and have the latest firmware at time of shipping


--------------------------------------------------------------------------------------------------------------------------

                                                                          NOTICE
  • Please note that the screen will not be seen behind dark red defusers on the radio, you need to remove the red or green window, please also read the FAQ before you buy.
  • If your not sure if your confident enough to install this kit get a tech to install it for you, Contact Ray at Razor Radios Ray at Razor Radios to get a quote on installing the CB40A into your radio.
  • Please use contact email address to let the seller know what post code your from so they can give you a price on postage
--------------------------------------------------------------------------------------------------------------------------
« Last Edit: November 02, 2019, 10:26:46 AM by BuNtEr »