Official support for CB40/A/C/SP > CB40

Cb40 into a compact Uniden PC122


CB40 into a compact Uniden PC122 the JYD aka Junk Yard Dog

Junk Yard Dog

this is the Radio that was donated by Greg Miller for this test, it was found at the tip, not knowing if the radio even worked very dirty and inside very dusty, i dusted inside but will leave the radio as is on the outside as it was found.

CB40 installed and working as it should. PLL in these is a UPD2824

Lots of work went into making this one fit, had to have a CB40 hard wired to the PCB instead of having the header pins so it would fit in the pc122 with the covers on.


Hard wired CB40


[0] Message Index

Go to full version