CB40 Setup guides and firmware updates

[BuNtEr]

CB40 Setup Menu and scan settings PDF:-

Right click the Download and Save link as
Download 378kb

=======================================================================

Firmware updates:
--------------------------------------------------------------------------------------------------------------------------------
LATEST UPDATE 21.9.19

CB40EX.ino.eightanaloginputs.21.9.19.hex

CB40 firmware upgrade to read the New Zealand 40 channels when "show NCode" is off".. when you go below channel 1 (USA) the indicator reads LOW but on NZ 40 channels for Channel 35 for example it reads LOW 35

Right click the Download and Save link as
Download 80.8kb

--------------------------------------------------------------------------------------------------------------------------------

CB40EX.ino.eightanaloginputs.24.8.19.hex

Just had to clean up the code and fix a bug or 2.

Very stable firmware.

Right click the Download and Save link as
Download 80.8kb

--------------------------------------------------------------------------------------------------------------------------------

CB40.ino.eightanaloginputs.27.4.19.hex

Update is full re code of the Coding, faster scanning, also scanning level font now the same as the rest of the font of the CB40, Also added the Sharp CB5470 PLL in the PLL presets menu in setup..

Right click the Download and Save link as
Download 80.8kb

--------------------------------------------------------------------------------------------------------------------------------
CB402.ino.eightanaloginputs 22.10.18.hex

Update is 6 digit frequency readout, Home Channel fix as it would not save, also added the 9th programming output for radios that need 9 wires like the UPD858 PLL.

Right click the Download and Save link as
Download 53.5kb

--------------------------------------------------------------------------------------------------------------------------------